Wall Mount By Adhesive Strips

ModProj Wall Bracket – Step-by-Step Instructions for Mounting Using 3M Command Strips (No-Drill Option)

Step 1: Prepare the Surface

• Ensure the wall surface is clean and smooth for the best results. It’s recommended to clean the area with isopropyl alcohol to remove dust and debris.

Step 2: Position the Wall Bracket

• Use a level to ensure the Wall Bracket is straight. Hold the bracket in place and lightly mark the edge on the wall using a pencil for proper alignment.

Step 3: Attach the Command Strips

• Place one Command Strip adhesive on the back of the bracket.
• Ensure the strip is properly aligned with the bracket.
• Place another Command Strip adhesive on the wall, slightly inset (1/16” or 3mm) from the marked edge.

Step 4: Mount the Bracket

• Press the bracket onto the Command Strip adhered to the wall.
• Apply firm pressure along the surface area of the Wall Bracket to ensure the velcro attaches and the adhesive sticks properly to the wall.

Step 5: Final Check

• Ensure that the bracket is securely attached and the Command Strip is holding it in place.

Disclaimer:
The included 3M Command Strips are rated to hold up to 10 pounds. For more details on weight limits and proper use, please refer to 3M’s product specifications and instructions.

You are now ready to mount your item securely using the ModProj Wall Bracket!